在线观看日韩av毛片-天堂中文最新资源在线-女人高潮私密按摩视频-欧美日本伦理在线观看

Education

1999.9~2003.6

Shandong University, Ph.D.

1992.9~1995.6

Shandong University of Technology, M.A.

1986.9~1990.6

Shandong University of Technology, B.A.

Professional Experience

2021.06~present

Professor, School of Mechanical Engineering, Shandong University

2019.12~2021.06

Research Scholar, New Jersey Advanced Manufacturing Institute (NJAMI), Rutgers, The State University of New Jersey

2009.08~2019.12

Professor, School of Mechanical Engineering, Shandong University

2007.10~2009.08

Postdoctoral Fellow, S.M. Wu Manufacturing Research Center, University of Michigan

2004.11~2007.10

Professor, School of Mechanical   Engineering, Shandong University

2004.02~2004.11

Research Associate, e-Manufacturing Laboratory, Department of  Automation and Computer-Aided Engineering, Chinese University of Hong Kong

2003.09~2004.02

Professor, Department of Mechanical   Engineering, Shandong University of Technology

1999.10~2003.09

Associate Professor, Department of Mechanical Engineering, Shandong University of Technology

1996.07~1999.10

Lecture, Department of Mechanical   Engineering, Shandong University of Technology

1995.07~1996.07

Teaching Assistant, Department of   Mechanical Engineering, Shandong University of Technology

1990.07~1992.09

Associate Engineer, Jinan Mold Factory

Teaching

Theory of Mechanisms and Machines

Non-traditional Manufacturing Technology

Digital Design and Virtual Prototype Technology

Areas of Research Interests

Non-traditional Machining and Machine Tool

Mechanical Design and Digital Simulation

Biomedical Design and Manufacturing

Research Projects

Basic Research on Accurate Reduction and Fixation of Arms and Legs Fracture Based on Medical Imaging Guidance, The National Natural Science Foundation of China (Grant No. 52075301), 2021.01-2024.12.

Research and Development of Key Technology and Platform of Minimally Invasive Operation Robot for Thyroid Tumor, National Key R&D Program of China (Grant No.2019YFC0119200), 2019.07-2021.12

A Robot System for High Precision Operation of Reduction and Fixation of Limb Fracture, The Key R&D Program of Shandong Province(Grant No. 2019GHZ002), 2019.12-2022.12

Accuracy Control Theory and Technology of Micro Electrical Discharge Machining , The National Natural Science Foundation of China(Grant No. 51775316), 2018.01-2021.12

Mechanism of Ultrasonic Assisted Tissue Cutting and its Application in Biopsy Sampling, The National Natural Science Foundation of China(Grant No. 51475274), 2015.01-2018.12

Research on Size Effect in Micro-EDM, The National Natural Science Foundation of China(Grant No. 51375274), 2014.01-2017.12

Building of Innovation Platform for Large Precision Press, Major National Science and Technology Program(Grant No.: 2011ZX04016-09), 2011.01-2013.06

 Study on Near Dry Electrical Discharge Machining with Micro Powder, The National Natural Science Foundation of China(Grant No. 5107523     9), 2011.01-2013.12    

Scientific and Professional Societies

Senior member, Chinese Society of Mechanical Engineering

Committee Member, Non-traditional Manufacturing Technology Society of China

Committee Member, Mechanical Industry Automation Society of China

Vice Director of Head and Neck Professional Committee, National Strategic Alliance of Technology Innovation for Minimally Invasive Tumor Therapy

 Vice Director of East China Theory of Mechanisms and Machines Teaching an d Research Association

Summary of Selected Publications

Q.H. Zhang, J.H.   Zhang, Z.X. Jia, X.Ai, Fracture at the exit of the hole during the ultrasonic   drilling of engineering ceramics, Journal of Materials Processing Technology,   Vol. 84 (1998) pp20-24.

Q.H. Zhang, C.L.   Wu, J.L. Sun, Z.X. Jia, The mechanism of material removal in ultrasonic   drilling of engineering ceramics, Journal of Engineering Manufacture, Proceedings of the Institution of Mechanical   Engineers Part B, Vol. 214 No.B9 (2000) pp805-810.

Q.H. Zhang, J.H.   Zhang, D.M. Sun, G.D. Wang, Study on the diamond tool   drilling of engineering ceramics, Journal of Materials Processing Technology,   Vol.122 (2002) pp232-236.

Q.H. Zhang, J.H.   Zhang, D.M. Sun, J.X. Deng, Analysis of Fracture at the Exit of Engineering   Ceramics During the Vibration Drilling of the Hole, Journal of Engineering   Manufacture, Proceedings of the Institution of Mechanical Engineers Part B,   Vol. 216 (2002) pp1109-1113.

Q.H. Zhang, J.H.   Zhang, J.X. Deng, Y. Qin, Z.W. Niu, Ultrasonic vibration electrical discharge   machining in gas, Journal of the Materials Processing Technology, Vol. 129 (2002)   pp135-138.

Q.H. Zhang, J.H.   Zhang, S.F. Ren, J.X. Deng, X. Ai, Study on Technology of Ultrasonic Aided   Electrical Discharge Machining in Gas, Journal of Material Processing   Technology, Vol.149 (2004) pp. 640-644.

Q.H. Zhang, R.   Du, J.H. Zhang and Q.B. Zhang, An investigation of ultrasonic-assisted   electrical discharge machining in gas, International Journal of Machine Tool   & Manufacture, Vol.46, Issues 12-13 (2006) pp1582-1588.

Jason Z. Moore,   Qinhe Zhang, Carl S. McGill, Haojun Zheng, Patrick McLaughlin, and Albert J.   Shih, Modeling of the Plane Needle Cutting Edge Rake and   Inclination Angles for Biopsy, Transactions of the ASME(Journal of   Manufacturing Science and Engineering), Vol.132, Issue 5, 2010, pp051005   (8 pages).

Xue Bai, Qinhe   Zhang*, Jianhua Zhang, Dezheng Kong, Tingyi Yang, Machining   Efficiency of Powder Mixed Near Dry Electrical Discharge Machining Based on Different   Material Combinations of Tool Electrode and Workpiece Electrode, Journal of   Manufacturing Processes, Vol.15 (2013) pp474-482.

Min Zhang, Qinhe Zhang*, Haijiao Wang, Guowei Liu, Tuodang Guo, Research on a single pulse discharge to   discriminate EDM and EAM based on the plasma tunnel and crater geometry, Journal of Materials Processing   Technology, Vol.219 (2015) pp248-256.

Qingyu Liu, Qinhe Zhang*, Guang Zhu, Kan Wang, Jianhua Zhang, Chunjie Dong, Effect of Electrode Size on the Performances of Micro-EDM,   Materials and Manufacturing Processes, Vol.31, No.4 (2016)pp391-396.

Qingyu Liu, Qinhe   Zhang*, Min Zhang, Jianhua Zhang, Review of size effects in micro electrical   discharge machining, Precision Engineering, Vol.44 (2016) pp 29-40.

Yingqiang Xu,   Xuemei Qin, Guowei Liu, Lei Tan, Hongjian Dong, Pengpeng Wei, Qinhe Zhang* and   Hongcai Zhang*, A new method for evaluating the normal rake angle and   inclination angle on medical needles, Proceedings of the Institution of   Mechanical Engineers, Part H: Journal of Engineering in Medicine, Vol.232(1) (2018)   pp24-32.

Kan Wang, Qinhe Zhang*, Guang Zhu, Jianhua Zhang, Effects   of tool electrode size on surface characteristics in micro-EDM, International Journal of Advanced   Manufacturing Technology, Vol.96 (2018) pp3909-3916.

Yuhua Huang,   Qinhe Zhang*, Qixuan Xing, Zhenyang Yao, Jucai Li, Effects of electrode   rotational speed on processing performances of AISI 304 in micro-electrical   discharge machining, The International Journal of Advanced Manufacturing   Technology, 2019, 105(1-4): 1665-1674.

Guang Zhu, Min   Zhang, Qinhe Zhang*, Kan Wang, High-speed vibration-assisted electro-arc   machining, International Journal of Advanced Manufacturing Technology (2019) 101:3121–3129.

Guang Zhu, Min   Zhang, Qinhe Zhang*, Qixuan Xing, Zhenyang Yao, Investigation of a   single-pulse electrical arc discharge in vacuum based on the crater   morphology and discharge channel, The International Journal of Advanced   Manufacturing Technology, Vol.107(2020) pp3437–3448

Chenxu Cai,   Chunsheng Sun, Yin Han, Qinhe Zhang*. Clinical flexible needle puncture path   planning based on particle swarm optimization, Computer Methods and Programs   in Biomedicine, Computer methods and programs in biomedicine, Vol.193   (2020)pp105511.

Yuhua   Huang, Qixuan   Xing, Ming   Liu & Qinhe   Zhang*, Prediction of electrode loss in micro-EDM drilling based on discharge   time,The   International Journal of Advanced Manufacturing Technology, Vol. 115(2021) pp3003–3010.