姓名 |
姜兆亮
|
性別 |
男 |

|
出生年月 |
1971.10
|
行政職務 |
本科生院副院長
|
學歷 |
博士研究生 |
學位 |
博士 |
專業技術職務及任導師情況 |
教授,博士研究生導師 |
所在一級學科名稱 |
機械工程 |
所在二級學科名稱 |
機械制造及其自動化 |
|
學術兼職
中國圖學學會數字化設計制造專業委員會委員
計算機集成制造系統期刊編委
國內外學習和工作經歷
1998.09-2000.12, 于山東大學攻讀工學碩士學位
2001.09-2004.06,于山東大學攻讀工學博士學位
2007.12-2008.12,在美國密西根大學機械工程學院作訪問學者,從事2微米制造技術研究
2014.07-2015.07,在美國伊利諾伊大學芝加哥分校機械工程學院作訪問學者,從事制造系統節能控制技術研究
主要研究領域
(1)智能制造技術。離散制造系統的高級計劃排程技術,虛擬現實技術,制造車間的數字孿生系統,智慧工廠建模與物流規劃優化。
(2)智能機器人研發。視覺識別技術,智能采摘機器人設計與開發,動態路徑規劃方法。
(3)增材制造技術。圍繞醫工交叉,研究氧化鋯基多材料復合的醫用植入體柔順梯度增材制造技術。
承擔科研項目情況
[1] 2020-2022,基于虛擬現實的井下采煤智慧檢測與控制系統開發
[2] 2020-2022,名優茶的精準識別與智能采摘機器人研發
[3] 2020-2023,高續航智能化農業植保無人機關鍵技術研究
[4] 2020-2021,高品質發動機制造大數據構建及數據分析與應用項目
[5] 2019-2021,冷藏車廂內溫度的遠程精準調控系統開發
[6] 2018-2020,功能梯度化口腔種植體的增材制造方法研究
[7] 2017-2020,大薄弧板表面陣列特征群的銑削變形機理及控制方法研究
[8] 2016-2019,低溫差冷藏車廂優化設計
[9] 2016-2019,沖壓計劃排程與動態管控系統
近期主要的代表性期刊論文
[1] Jiang ZL*, Li G, Zhao L, et al. Generation mechanism of stress wave while milling aluminium 2219[J]. Australian journal of mechanical engineering, 2020:1-10.
[2] Zhao L, Jiang ZL*, Zhang C, et al. Development model and experimental characterization of residual stress of 3D printing PLA parts with porous structure [J]. Applied physics. A, Materials science & processing, 2021, 127(2).
[3] Zhang C, Wang F, Jiang ZL*, et al. Effect of graphene oxide on the mechanical, tribological, and biological properties of sintered 3Y–ZrO2/GO composite ceramics for dental implants[J]. Ceramics International, 2021, 47(5):6940-6946.
[4] Guo W, Jiang ZL* Zhang C, et al. Fabrication process of smooth functionally graded materials through a real-time inline control of the component ratio[J]. Journal of the European Ceramic Society, 2021, 41(16):256-265.
[5] Zhang C, Chen S, Jiang ZL*, et al. Highly Sensitive and Reproducible SERS Substrates Based on Ordered Micropyramid Array and Silver Nanoparticles[J]. ACS Appl Mater Interfaces, 2021, 13(24):29222-29229.
[6] Zhang C, Jiang ZL*, Zhao L, et al. Mechanical characteristics and deformation mechanism of functionally graded triply periodic minimal surface structures fabricated using stereolithography [J]. International journal of mechanical sciences, 2021, 208:106679.
[7] Zhao L, Jiang ZL*, Zhang C. Residual stress and fracture toughness of sintered body of ZrO2-GO composite ceramics material [J]. Ceramics International, 2021, 47(1):388-392.
[8] Zhang C, Jiang ZL*, et al. Stability, rheological behaviors, and curing properties of 3Y–ZrO2 and 3Y–ZrO2/GO ceramic suspensions in stereolithography applied for dental implants [J]. Ceramics International, 2021, 47(10, Part A):13344-13350.
[9] Zhao L, Jiang ZL* Zhang C, et al. Theoretical modeling based on stress wave propagation and experimental verification of residual stress in stereolithography printed ZrO2 ceramic suspensions[J]. Ceramics international, 2021, 47(19):26935-26941.
[10] 闞平, 姜兆亮*, 劉玉浩, 等. 多植保無人機協同路徑規劃[J]. 航空學報, 2020,41(04):260-270.
[11] 李廣倫, 姜兆亮*, 趙麗, 等. 鋁合金薄板的銑削動力響應特性仿真與實驗研究[J]. 振動與沖擊, 2020,39(11):63-68.
[12] 趙時, 姜兆亮*, 丁兆磊, 等. 梯級送風對冷藏車廂內溫度場的影響[J]. 制冷學報, 2020,41(05):116-123.
[13] 袁凱, 姜兆亮*, 劉傳勇. 新時代 新需求 新文科——山東大學新文科建設探索與實踐[J]. 中國大學教學, 2020(07):67-70.
[14] Chen S, Zhang C, Jiang ZL*, et al. Experimental investigation for roll-to-plate embossing of ordered micro-pyramid array on the silver sheet[J]. Journal of micromechanics and microengineering, 2020, 30(6):65008.
[15] Zhang C, Jiang ZL*. Mechanical properties and tribological behaviors of yttria-zirconia ceramics with additions of graphene oxide by hot-press sintering for dental implants[J]. Surface topography metrology and properties, 2020, 8(3):35010.
[16] Zhang C, Zhu H, Jiang ZL*, et al. Removal mechanism and surface quality of crystal semiconductor materials in scratching tests with Berkovich indenter[J]. Materials Science in Semiconductor Processing, 2020, 105:104746.
[17] Zhang C, Jiang ZL*, et al. Synthesis and characterization of multilayer graphene oxide on yttria-zirconia ceramics for dental implant[J]. Journal of materials research, 2020, 35(18):2466-2477.
[18] Zhang C, Jiang ZL*, Wang J, et al. Theoretical modeling and experimental characterization of boundary slip on aluminum surface with small-amplitude roughness[J]. Engineering Research Express, 2020, 2(1).
[19] Ma S,Jiang ZL*, Liu W. Modeling Drying-Energy Consumption in Automotive Painting Line Based on ANN and MLR for Real-Time Prediction[J]. International Journal of Precision Engineering and Manufacturing-Green Technology, 2019, 6(2):241-254.
[20] Ding Z, Jiang ZL*, Wang J, et al. The heat transfer enhancement of low temperature airflow foam effect in the ice storage charging process[J]. Energy and Buildings, 2019, 204:109477.
[21] Xia X, Jiang ZL*, Xu P. A detection algorithm of spatter on welding plate surface based on machine vision [J]. Optoelectronics Letters, 2019, 15(01):52-56.
[22] 趙陽, 姜兆亮*, 馬嵩華, 等. 汽車三維在線展示與虛擬試駕系統研究[J]. 包裝工程, 2018,39(18):124-128.
[23] 許鵬飛, 姜兆亮*, 趙陽, 等. 無色差光滑曲面特征點的提取及匹配算法[J]. 光學學報, 2018,38(04):277-284.
[24] 張子群, 姜兆亮*, 魏清月. 2219鋁合金動態力學性能及其本構關系[J]. 材料工程, 2017,45(10):47-51.
[25] 朱先萌, 姜兆亮*, 魏清月, 等. 多品種小批量產品沖壓計劃排程多目標優化[J]. 計算機集成制造系統, 2017,23(09):1907-1916.
近期授權發明專利
[1] 一種茶葉采集裝置及方法. ZL202011375342.3
[2] 一種口腔種植體材料的制備方法、種植體材料及應用. ZL201911328121.8
[3] 一種梯度供粉裝置、3D打印系統及方法. ZL201911288875.5
[4] 一種具有梯級送風功能的冷藏車廂、冷藏車及方法. ZL201910753509.6
[5] 一種高透光率高結合強度的柔性透明導電薄膜及其制備方法和應用. ZL201910362647.1
[6] 一種基于導電聚合物的柔性電極及其制備方法. ZL201910364753.3
[7] 一種表面增強拉曼檢測基底及其基于微納3D打印的制備方法和應用. ZL201910837590.6
[8] 一種柔性質子交換膜燃料電池極板及其制備方法. ZL201910544767.3
聯系方式
地址:山東省濟南市經十路17923號山東大學千佛山校區機械工程學院
郵編:250061
電話:0531-88364961
電子郵箱:jiangzhaoliang@sdu.edu.cn; jzljeff@163.com